BSVBB - 841 4393;FLEXICOLOR DEVELOPER REPLEN LORR, PART B

  • MSDS: BSVBB
  • Manufacturer: EASTMAN KODAK COMPANY
  • Product Name: 841 4393;FLEXICOLOR DEVELOPER REPLEN LORR, PART B
  • National Stock Number: 6750-01-360-6370
Product Identification

Product ID:841 4393;FLEXICOLOR DEVELOPER REPLEN LORR, PART B
MSDS Date:01/09/1998
FSC:6750
NIIN:01-360-6370
Kit Part:Y
MSDS Number: BSVBB

Responsible Party
EASTMAN KODAK COMPANY
343 STATE STREET
ROCHESTER, NY 14650
US

Emergency Phone: 716-722-5151

Info Phone: 716-722-5151

Cage: 19139

Contractor
EASTMAN KODAK CO US CUSTOMER SERVICE/GOVERNMENT SALES
ROCHESTER, NY 14650-3129 US

Telephone: 800-828-6203

Cage: 5K871

Ingredients

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 70 - 75%


HYDROXYLAMINE SULFATE

CAS: 10039-54-0

RTECS: NC5425000

Fraction By Weight: 25 - 30%

Hazards

LD50 LC50 Mixture:ORAL LD50 (RAT): 100-200 MG/KG
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CONTAINS HYDROXYLAMINE SULFATE. MAY
CAUSE BLOOD DISORDERS BASED ON ANIMAL DATA. INHALE-EXPECTED TO BE A
LOW HAZARD FOR RECOMMENDED HANDLING. EYE-CAUSES IRRITATION.
SKIN-HARMFUL IF ABSORBED THROUGH THE SKIN. CAUSES IRRITATION.
INGEST-HARMFULIF SWALLOWED.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:SKIN-MAY CAUSE ALLERGIC SKIN REACTION BASED ON
HUMAN EXPERIENCE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHALATION: IF SYMPTOMATIC, MOVE TO FRESH AIR. GET MEDICAL
ATTENTION IF SYMPTOMS PERSIST. EYES: IMMEDIATELY FLUSH WITH PLENTY
OF WATER FOR 15 MIN. GET MEDICAL ATTENTION. SKIN: IMMEDIATELY FLUSH
WITH P LENTY OF WATER FOR 15 MIN WHILE REMOVINGCLOTHES/SHOES. GET
MEDICAL ATTENTION. INGEST: INDUCE VOMITING AS DIRECTED BY MEDICAL
PERSONNEL. CALL A PHYSICIAN OR POISON CONTROL CENTER IMMEDIATELY.

Fire Fighting

Flash Point:NONFLAMMABLE
Extinguishing Media:USE APPROPRIATE AGENT FOR ADJACENT FIRE.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
PROTECTIVE CLOTHING. USE WATER SPRAY TO KEEP FIRE-EXPOSED
CONTAINERS COOL.
Unusual Fire/Explosion Hazard:FIRE/EXCESSIVE HEAT MAY PRODUCE HAZARDOUS
DECOMPOSTION PRODUCTS. SOLUTION CONTAINS A STRONG REDUCING AGENTS.
DRIED PRODUCT RESIDUE CAN ACT AS A REDUCING AGENT.

Accidental Release

Spill Release Procedures:FLUSH TO SEWER WITH LARGE AMOUNTS OF WATER.
FOR LARGE SPILLS: ABSORB SPILL WITH VERMICULITE OR OTHER INERT
MATERIAL, THEN PLACE IN A CONTAINER FOR CHEMICAL WASTE. PREVENT
RUNOFF FROM ENTERING DRAINS, SEWERS OR STREAMS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:CONTENTS MAY DEVELOP PRESSURE UPON
PROLONGED EXPOSURE TO HEAT. STORE IN A COOL PLACE. KEEP CONTAINER
TIGHTLY CLOSED TO PREVENT THE LOSS OF WATER.
Other Precautions:KEEP AWAY FROM INCOMPATIBLE SUBSTANCES. STORE IN
ORIGINAL CONTAINER.

Exposure Controls

Respiratory Protection:IF ENGINEERING CONTROLS DO NOT MAINTAIN AIRBORNE
CONCENTRATIONS BELOW RECOMMENDED EXPOSURE LIMITS, AN APPROVED
RESPIRATOR MUST BE WORN. RESPIRATOR TYPE: ORGANIC VAPOR.
Ventilation:GOOD GENERAL VENTILATION, TYPICALLY 10 AIR CHANGES PER
HOUR, SHOULD BE USED. RATES SHOULD MATCH CONDITIONS.
Protective Gloves:WEAR IMPERVIOUS GLOVES.
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS OR GOGGLES
Other Protective Equipment:WEAR IMPERVIOUS CLOTHING APPROPIATE FOR THE
RISK OF EXPOSURE. EYE BATH, WASHING FACILITIES, SAFETY SHOWER.
Work Hygienic Practices:WASH THOROUGHLY BEFORE EATING.
Supplemental Safety and Health
KEY1:C3, THIS ENTRY IS FOR PART B OF A THREE PART KIT. KIT MAKES 25
GALLONS OF WORKING SOLUTION.

Chemical Properties

HCC:C2
Boiling Pt:B.P. Text:>212F,>100C
Decomp Temp:Decomp Text:230F,110C
Vapor Pres:18
Vapor Density:0.6
Spec Gravity:1.176
pH:3.0
Solubility in Water:COMPLETE
Appearance and Odor:COLORLESS LIQUID, ODORLESS.
Percent Volatiles by Volume:70-75%

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, COMBUSTIBLE MATERIAL, HALOGENATED MATERIALS.
Stability Condition to Avoid:STABLE; HOWEVER, MATERIAL CAN DECOMPOSE
ABOVE 110C (230F). AVOID HEATING ABOVE ROOM TEMPERATURE.
Hazardous Decomposition Products:NITROGEN OXIDES, SULFUR DIOXIDE,
AMMONIA.

Disposal

Waste Disposal Methods:DISCHARGE, TREATMENT OR DISPOSAL MAY BE SUBJECT
TO NATIONAL, STATE OR LOCAL LAWS. FLUSH TO SEWER WITH LARGE AMOUNTS
OF WATER. SINCE EMPTIED CONTAINERS RETAIN PRODUCT RESIDUE, FOLLOW
LABEL WARNINGS EVE N AFTER CONTAINER IS EMPTIED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.